Concrete Release Agents

 
Product
Data
Safety

View eco-lease MO2 

eco-lease MO2

eco-lease Bio MO2 is a readily biodegradable chemical release agent specially formulated to give easy release from pre-cast moulds or formwork and provides a high quality surface finish to concrete.

 
 

View eco-lease 13T 

eco-lease 13T

eco-lease 13T is an extremely versatile high performance vertical surface chemical release agent. The blend of highly active surfactants in the release agent assist in reducing surface tension at the interface between the concrete and the formwork, ensuring that optimum release is achieved together with a high quality concrete finish. eco-lease 13T is also formulated to reduce the skin sensitisation which is sometimes associated with conventional mould release oils.

 
 

View eco-lease DC 

eco-lease DC

eco-lease DC is a high performance chemical release agent specifically designed for the dry cast industry. The surfactant blend is formulated to assist in reducing the surface tension at the interface between the concrete and the formwork, ensuring that optimum release is achieved whilst maintaining the high quality of the surface finish. eco-lease DC is specially formulated to reduce skin sensitisation sometimes associated with conventional concrete mould release oils.

 
 

View eco-lease Bio DC25e 

eco-lease Bio DC25e

eco-lease Bio DC25e is a synthetic release agent designed for heated pre cast beds, whilst providing a high quality surface finish to concrete. eco-lease Bio DC25e is formulated with environmentally friendly components and is fully biodegradable according to OECD-301F.

 
 

View logco-lease 

logco-lease

logco-lease is an extremely versatile high specification chemical release agent blended with highly active surfactants. The blend of highly active surfactants assist in reducing surface tension at the interface between the concrete and the formwork, ensuring that optimum release is attained hence achieving a high quality concrete surface finish.

 
 

View logco-lease QD 

logco-lease QD

logco-lease QD is an extremely versatile quick drying high specification chemical release agent specially blended to give optimum release resulting in high class concrete finishes from most types of formwork.

 
 

View logco-strike CMO 

logco-strike CMO

logco-strike CMO is an invert emulsion (ie. Water-in-oil emulsion) commonly known as "Soap Oil". It is an economical dual purpose mould oil in that it is suitable for both timber and metal based formwork providing an ideal release agent for ordinary day-to-day concreting.

 
 

Concrete Surface Retarders

 
Product
Data
Safety

View eco-tard Liquid TF 

eco-tard Liquid TF

eco-tard Liquid TF is an aqueous biodegradable top face retarder for application onto freshly placed horizontal concrete to produce an exposed aggregate surface, excellent for receiving subsequent concrete or toppings.

 
 

View eco-tard Gel MF 

eco-tard Gel MF

eco-tard Gel MF (Mould Face) is an aqueous biodegradable pigmented retarder designed to be applied to formwork surfaces to produce an exposed aggregate surface which gives an excellent key for subsequent concreting or surface treatments; it is ideal for construction joints and rendering applications.

 
 

Concrete Curing Agents

 
Product
Data
Safety

View eco-cure SL 

eco-cure SL

eco-cure SL is an aqueous solution of metal silicates which, when applied to fresh concrete, forms a micro-crystalline seal in the pores. Sufficient moisture is retained once the seal is formed in order to assist full hydration of the cement. Unlike resin-based curing membranes that degrade on concrete surfaces, eco-cure SL becomes an integral part of the surface.

 
 

View eco-cure sealer 

eco-cure sealer

eco-cure sealer is a ultra low odour single pack white polymeric aqueous emulsion designed to impregnate concrete surfaces thus acting as a curing aid, surface sealer, dust-proofer and hardener.

 
 

View logco-cure R90 

logco-cure R90

logco-cure R90 is formulated with solvents and inert hydrocarbons and is designed to provide a fast drying, flexible, tough and impervious high efficiency membrane that protects the concrete surface from rapid water evaporation during the initial curing stages.

 
 

View logco-cure R90A 

logco-cure R90A

logco-cure R90A is formulated with solvents and inert hydrocarbons and is designed to provide a fast drying, flexible, tough and impervious membrane that protects the concrete surface from rapid water evaporation during the initial curing stages. It incorporates an aluminium pigment for situations where light reflectance is required to ensure the temperature of the concrete is kept to a minimum.

 
 

Surface Sealing

 
Product
Data
Safety

View eco-tuf RTA 

eco-tuf RTA

eco-tuf RTA is a ready to apply aqueous solution of metal silicates which is designed to improve, harden and dustproof both new and existing concrete floors.

 
 

View eco-wallseal 

eco-wallseal

eco-wallseal is a high performance clear, solvent free water repellent specially formulated to prevent water penetration to brick, stone, concrete, pebbledash, rendering and other mineral substrates. eco-wallseal penetrates deeply into the surface treated to provide effective long term water repellence, is unaffected by ultra violet light and offers superior water beading.

 
 

View eco-pave block sealer 

eco-pave block sealer

eco-pave block sealer is a clear, solvent free acrylic resin coating used to seal and protect patios, paths, natural stone, concrete and block paving (and other hard landscaped areas) from the effects of sunlight, water, oil, petrol and lichen growth. The result is a hard wearing water repellent film which has a low sheen, slip resistant finish.

 
 

Barrier Oils

 
Product
Data
Safety

View eco-barrier bio 

eco-barrier bio

eco-barrier bio is an extremely versatile high specification biodegradable barrier oil which has been specially formulated to prevent the adhesion of asphalt , concrete, cement mortars and similar substances to a wide variety of surfaces including steel and plastics. It is ideal for the protection of plant & equipment such as mixing vessels, concrete mixers, bitumen paver machines and rollers.

 
 

Oils

 
Product
Data
Safety

View Hydraulic Oil ISO 46 

Hydraulic Oil ISO 46

Logco Hydraulic Oil ISO 46 is a premium quality hydraulic oil, blended from solvent refined base stocks and incorporating a top of the range zinc dialkyldithiophosphate based hydraulic oil additive package.

 
 

View Engine Oil 10W/40 

Engine Oil 10W/40

Logco 10w/40 Engine Oil is a multi-graded engine oil for mixed vehicle fleets. It is suitable for petrol engines plus most naturally aspirated and turbocharged diesel engines used in commercial vehicles and passenger cars.